Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 73 - / 109

Advanced Functions

Account Setting

Please refer to “Configuration and Registration” chapter for the basic account setting

information. The following table lists the parameters in Advanced Account Setting

section of the web interface.

Field Name Description

UDP Keep-alive

Message

Defines whether to activate the phone UDP Keep-alive

mechanism. The default is Enabled.

UDP Keep-alive

Interval(seconds)

This parameter specifies how often the phone will send a packet

to the SIP server. Default is 30 seconds.

Expire(seconds)

This parameter specifies the time frequency that phone

refreshes its registration. The default interval is 3600 seconds.

Local SIP Port Local SIP port. The default value is 5060.

RPort The parameter allows you configuring the proxy to send

responses back to a particular address and port. The default is

disabled.

SIP Session Timer This document defines an extension to the Session Initiation

Protocol (SIP). This extension allows for a periodic refresh of

SIP sessions through a re-INVITE or UPDATE request. The

refresh allows both user agents and proxies to determine if the

SIP session is still active.

Period(seconds)

This parameter sets the period of the subscription. The default

value is 3600.

DTMF Type Select DTMF type.

You can only configure these settings via Web interface:

1) Choose Account.

2) Select desired account.

3) Choose Advanced to do necessary settings.

You can check with your system administrator or service provider for more information.