Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 65 - / 109
unmute the call. When you press button all of the conversations will be muted.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
Press button to put your active call on hold.
During the call, there will be a warning tone every 30 seconds, suggesting that there is
a current call in hold state.
If there is only one call on hold, press button again to retrieve the call.
If there is more than one call on hold, press the Up/Down navigation keys to select the
desired call, then press button again to retrieve the call.
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.
Call Waiting
This call feature allows your phone to accept other incoming calls when there are other
active calls.
Handling a waiting call
By default Call Waiting is enabled, and when an incoming call is received during another
active call a warning tone will be played periodically.
In this situation, user can:
1) Accept the second call using the OK key. The first one will be put on hold
automatically. Or
2) Reject the call using button
Call Waiting Configuration