Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 60 - / 109
2) Intercom Allow: To set whether to answer the incoming intercom calls.
3) Intercom Mute: To set whether to mute the incoming intercom calls automatically.
4) Intercom Tone: To set whether to play ring tones when there is incoming intercom
calls to your extension.
5) Intercom Barge: To set whether to answer the incoming intercom calls during a
conversation. If the option is enabled, when there are incoming intercom calls to
your extension, if you are on an intercom conversation, it will refuse the call
automatically; or it will put the current call on hold and put the incoming intercom
call through.
6) Make your selection and use left or right navigation keys to enable or disable the
feature.
7) Press the OK button to save your changes.
To configure Intercom settings using the web interface:
1) Go to Phone->Features and set Intercom related parameters
2) Press Confirm to save your changes or Delete to discard.
Note:
To initiate an Intercom call you can either use a function key or speed dial key or
directly type a code supported by your PBX. Please see Key Configuration chapter.
Auto Answer
Auto answer allows an incoming call to be answered without requiring any action by the
user. This is a useful feature for people who have some kind of impairment. This
function is set on a per account basis.
This function should be enabled/disabled by admins or vars.
To set Auto Answer via the IP phone interface:
1) Make sure active User type is var or admin.
2) Press ->3.Settings->2.Advanced, enter the password and press OK
button
3) Then choose 1.Accounts->Line X to enter the configuration page, use the up and
down navigation keys to choose Auto Answer option.
4) Use the left or right navigation keys to enable or disable the auto answer function.
The default is Disable.