Specifications
Temporis IP 200 Administrator Guide ed 1.0 - 58 - / 109
1. When you get an incoming call, if you press during ringing you can
dynamically forward the call to a desired number.
2. You can quickly enable/disable Forward by pressing down key or Transfer key from
idle mode. Forward type and target number will be the last ones configured using the
menu.
3. Only admin/var can set the On/off codes. Make sure the right User Type is active.
4. When Call forward is locally enabled (not through codes), the corresponding icon will
be shown on the display
To configure Call Forward via Web interface:
Go to Phone->Features->Forward to do necessary changes. Please refer to above
configuration information.
DND/FWD Synchronisation
This feature requires specific server support. Check with your service provider.
When this function is enabled, DND/FWD status on device and server will be in
correspondence.
To set Feature Key Synchronisation via the Web interface:
1) Go to Phone->Features-> Feature Key Synchronisation
2) Choose whether to enable this function from the pull-down menu.