Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 57 - / 109
codes to the server, and the server will turn on/off the DND function. In this case
any calls addressed to the phone’s extension will be rejected by the server
automatically, and will not be included in the Call Log.
Note:
When DND is locally enabled (not using codes), the corresponding icon will be shown on
the display
Call Forward
This feature allows you to divert an incoming call to another phone number e.g. a cell
phone or voice mailbox.
The following call forwarding events can be configured:
 Always: Incoming calls are immediately forwarded.
 Busy: Incoming calls are immediately forwarded when the phone is busy.
 No Answer : Incoming calls are forwarded when the phone is not answered after a
specific time period.
To configure Call Forward via Phone interface:
1) Go to ->2.Features->1.Forward. You can also press button or a
previously configured programmable key to enter the forward setting page directly
when the phone is in idle mode.
2) There are 3 options: Always, Busy and No Answer.
3) Select one of them with OK. Then enter the phone number to which calls must be
forwarded. For No answer you can also select the No answer timeout pressing the
down key.
4) If you prefer the server to perform this function, please enter the On Code and Off
Code options, then when you choose to enable the call forward function via your IP
phone, it will send the corresponding code to the server, which will take care of
forwarding your calls. In this case forwarded calls will not be stored in the Call Log.
5) Press the OK button to save the changes.
Notes: