Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 42 - / 109
To terminate calls initiated with click-to-dial you can either use phone interface or click
the Hang up button in the web page.
Live Dialpad
This setting defines whether dialed digits will be sent out automatically after a timeout
or not. In that case it will be necessary to press OK or End of dialing key for dialing
process to be completed.
This function can only be set via the Web interface, with admin/var rights:
1) Go to Phone->Preference->Live Dialpad.
2) Enable or disable it in the pull-down menu.
3) Click Confirm button to save the change.