Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 22 - / 109
Your IP200 has been configured by default to handle 2 simultaneous calls (either
incoming, outgoing or a mixture). However you can set this limit to any number up to
20.
To set max number of calls using the web interface:
3) Go to Phone->Features->Max simultaneous calls
4) Enter the desired value and press Confirm button
Note:
This setting is independent from Call Waiting, which only limits incoming calls when
disabled. See Call Waiting chapter for more details.
Keypad Lock
You can lock the keypad of your phone when you are temporarily not using it. This
function helps you to protect your phone from unauthorized use. You can lock the
following specific keys:
Menu Key: The Menu key cannot be used until unlocked. You cannot access the
menu of the phone.
Function Keys: The hard function keys cannot be used until unlocked. You cannot
access the MESSAGE, HEADSET, TRANSFER, REDIAL, Speaker, CONFERENCE, HOLD,
Navigation Keys, OK button, Mute button, Volume Adjustment button, etc.
All Keys: None of the keys can be used until unlocked. You can only use the
phone to answer incoming calls.
Lock&Answer: In this mode you cannot initiate or terminate calls. You will receive
calls in auto answer mode. You will also have access to the Menu.
To enable keypad lock via Phone interface:
Press ->3.Settings->2.Advanced, enter the password, and then press OK
button.
Choose 3.Keypad Lock->OK.
Use the left or right navigation keys to highlight the one you want to lock.