Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 11 - / 109
Account Settings
The phone attempts to register to the SIP server using the account data provided by
automatic or manual initialization.
Choose Account page. You will find the following parameters:
Field Description
Register Status It shows the register status of the phone (read only)
Account Active You can choose on/off to enable/disable the account respectively.
Label The name showing on the LCD of current device.
Display Name The local phone name showing on the other phone when calling.
Register Name Register name provided by ISP.
User Name User account information, provided by ISP.
Password Account password provided by ISP.
SIP Server SIP server address provided by ISP.
When all accounts registering fail, the phone will display "No Service" by default.
When the phone reboots, it will register automatically. If many phones register at the
same time, for example after a power outage, the SIP server may be affected; admins
can set a register power up time so that the phones will register a random time after
power up.
Setting power up time via web interface:
Choose network->Advanced-> Random Registration, enter the time in the field and
validate with “Confirm”.
Note:
Should the IP PBX (SIP registrar) require an authentication, a correct password is
needed. Make sure you are using the appropriate input method or enter the password
via the web user interface.