Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 104 - / 109
Trouble shooting
I cannot register to the server
Check the IP address (press OK key for status). If you set your WAN port in DHCP mode,
please make sure there is an available DHCP server.
Check your gateway.
Check your DNS server.
Make sure your account information is the same as you got from your service provider.
Check whether the SIP server is on.
Check the SIP register port, the default value is 5060.
I can’t get an IP address
Make sure you have plugged the Ethernet cable into the WAN port.
Make sure there is an available DHCP server on, and there are available IP addresses in
the server.
Try to set your WAN port to static IP client mode.
During a call, I cannot hear any voice
Make sure your handset is tightly connected with the phone.
Check whether you have muted the conversation or not.
Consult the outbound server details with your service provider.
I have problems to send DTMF digits during calls
Check which kind of DTMF you are using, and whether it is compatible with the server.
Consult the payload value with your service provider.
Time and date are not correct
Select the right time zone or enter the time information manually on the webpage or
the phone.