Installation guide

 

  
 

AppendixC Safety and Agency Regulatory Notices
62 /66
3EC 16807 AAAA TCZZA Ed. 07
C.1 Safety Instructions
The Speed Touch equipment is intended for:
" InĆhouse stationary desktop use; the maximum ambient
temperature may not exceed 40ºC (104ºF).
" It must not be mounted in a location exposed to direct or
excessive solar and/or heat radiation.
" It must not be exposed to heat trap conditions and must not
be subjected to water or condensation.
" It must be installed in a Pollution Degree 2 environment.
Unplug this product from the wall socket and PC before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
Do not use this product near water, for example, near a bathtub,
wash bowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool.
The Speed Touch is powered via the USB connector on your
computer,oranUSBhubport.
The powering of this product must adhere to the power
specifications indicated on the marking labels.
Do not allow anything to rest on the USB cord. Do not locate this
product where the cord will be subject to persons walking on it.
Pay particular attention to the cord's plug, receptacle and
cableĆtoĆbody entry point; do not use the product when these
points of the cord are damaged.
Do not overload wall (mains) outlets and extension cords as this
increases the risk of fire or electric shock.