Installation guide





4 Speed Touch USB Software

52 /66

3EC 16807 AAAA TCZZA Ed. 07

4.2 Upgrading/Repairing Driver Software

Prior to a driver software upgrade, or repair, the software

must be readily available on a CDĆrom or resident on your hard

disk.

1. Start the installation wizard from the location where

your upgrade software resides. Therefor, open a 'Run' window

and enter following path:

C:\...\Setup.exe

,where

C:\...\

stands for the location where your upgrade

software resides.

Or,

Insert the

upgrade CDĆrom in the PC's CDĆrom drive.

The Alcatel

wizard will start automatically.

Note: In case the Alcatel

wizard does not start

automatically, open a 'Run' window via Start ³ Run from the

Start menu and enter following path:

D:\Setup.exe

,where

stands for the drive letter of your CDĆrom drive.

2. The 'Speed Touch USB Setup' window pops up:

Select and click to continue.