Installation guide

 

4 Speed Touch USB Software
50 /66
3EC 16807 AAAA TCZZA Ed. 07
4.1 Removing Driver Software
Your is a hot swapable USB device, meaning that you can
plug it in and out without powering down the PC.
Plugging out does however not mean that all software is removed
as well. Therefor, you must perform a removal of all
software, via your installation CDĆrom.
Proceed as follows:
1. Unplug the
from your PC's USB port.
Note: You do not need to turn off your PC prior to
disconnecting the
.
2. Insert your
installation CDĆrom in the PC's CDĆrom
drive and start the installation wizard.
3. The 'Speed Touch USB Setup' window pops up:
Select and click to continue.