User`s guide
2 Alcatel Speed Touch Web Interface
27 / 34
3EC 36511 AAAA TCZZA Ed. 02
Clicking this button pops up the Dynamic Host Configuration Protocol
(DHCP) page.
This page allows to:
Enable/disable the AST510 (Auto)DHCP server:
The AST510 features a DHCP server which allows the
PCs/computers on your local network to automatically obtain an IP
address (select
DHCP server). In case no DHCP is used on your
local network, the AST510 DHCP server can be disabled (select No
DHCP). The AST510 is furthermore able to probe your local
network for another DHCP server (select AutoDHCP) . If so, it slips
into DHCP client mode, if not the AST510 becomes DHCP server.
Click
Apply to apply your selection.
Configure the AST510 DHCP server lease pool properties:
The AST510 DHCP server (if enabled) will use the address pools
listed in this table to provide IP addresses to requesting DHCP
clients. To configure a userdefined IP address pool (appropriate to
your local network conditions, click
New and provide all needed
information. Click
Apply to add your entry to the table.
Overview the current leases the AST510 DHCP server supplied to
leases:
Via this table you can also manually add static DHCP leases for
specific hosts, if applicable.
DHCP