User`s guide

2 Alcatel Speed Touch Web Interface
26 / 34
3EC 36511 AAAA TCZZA Ed. 02
Clicking this button pops up the Network Address and Port Translation
(NAPT) page.
This page allows to:
 Overview or add/delete specific static NAPT entries:
You can add static NAPT entries by clicking New. Specify the outside
address and inside address for the entry as well as the protocol
and port on which the entry applies. In case the NAPT entry should
be applied on a dynamically assigned local peer IP address of a
connection, you should specify 0.0.0.0 as outside address. Click
Apply to add the entry to the table.
 Define a default server:
By specifying a default server IP address all incoming connections
will be forwarded to the device with this IP address. In most cases
this setting should be adequate for most server applications and
will make the need for specific static NAPT entries redundant.
Note: Do not forget to save your changes to persistent memory by
clicking
Save all.
NAPT