User`s guide

2 Alcatel Speed Touch Web Interface
25 / 34
3EC 36511 AAAA TCZZA Ed. 02
Clicking this button pops up the IP Address and Routing Tables page.
This page allows to:
 Overview or add/delete specific IP address entries for AST510's
interfaces:
You can add a static IP address for one of AST510's interfaces by
clicking
New. Specify the IP address, (sub)netmask, whether NAPT
should be applied on this address or not, and select the interface
for which the IP address applies (use eth0 for the Ethernet
interface). Click
Apply to add the entry to the table. All essential IP
routes according to this IP address will be automatically added to
the AST510 IP routing table.
 Overview or add/delete static IP routes for AST510's IP router:
Routing can be useful in the case of subnetting your local network.
You can add a static IP route by clicking New. Specify the destination
IP address (use the prefix notation to apply a subnetmask), source
IP address, and specify the gateway IP address or select the
interface for this route. Click
Apply to add the entry to the table.
Note: Do not forget to save your changes to persistent memory by
clicking
Save all.
Routing