User`s guide

Procedure
Result
2 Alcatel Speed Touch Web Interface
20 / 34
3EC 36511 AAAA TCZZA Ed. 02
1. Start the web browser on your PC or computer.
2. Contact the AST510 by entering its IP address (in most cases
10.0.0.138) in the URL field
3.
If a system password was set an authentication window will
pop up. Enter user name and System password in the
appropriate fields.
As a result the Configuration & Line Status page pops up:
From now on the AST510 acts as a Web server sending HTML
pages/forms at your request. You can fill out these pages/forms and
submit them to the AST510. The latter scans the pages and makes
configurations accordingly.