User`s guide
AST510's embedded
Dialin application
1 Alcatel Speed Touch 510 Installation
18 / 34
3EC 36511 AAAA TCZZA Ed. 02
Via the AST510 userfriendly web interface you are able to establish
dialin connections, preconfigured by the AST510 Setup wizard
configuration profile or via upload of the appropriate configuration file.
Note: The following provides only an example on how you can
establish your Internet connection. The actual implementation depends
on the preferences of your Service Provider.
To open a dialin connection:
1. Open a web browser on your PC/computer and browse to the
AST510 web pages:
By default the AST510 offers you the Status page.
2. Click Connect to open the Connections page which enables you to
establish dialin connections.
3. Click
next to the connection entry you want to establish a
connection with. As a result it will be highlighted.
4. Enter your user name and password in the appropriate fields. If you
want the AST510 to remember your credentials, check 'Save
password' ().
5. If applicable, enter the appropriate Service name.
6. Click
Connect.
While the AST510 tries to open the session 'trying' will appear
in the 'State' field. Once the session is active the field displays 'up'.
You can start your application or browse the Internet.
To close an active dialin connection:
1. Make sure you have access to the AST510 web pages.
2. On the Connections page, click
next to the connection entry
you want to close the connection for.
3. Click
Disconnect.
As a result the session state of the entry will change to down, i.e. it
becomes idle.