User`s guide
1 Alcatel Speed Touch 510 Installation
15 / 34
3EC 36511 AAAA TCZZA Ed. 02
2. The following window invites you to select the appropriate
connection profile for your Internet connectivity:
Select the connection profile and click to continue.
Note: In case the Service Provider included a separate disk with a
dedicated connection profile, click to navigate to the
location of the appropriate connection profile file.
3. Subsequent screens will guide you through the configuration setup
of both your AST510 and/or your PC. Follow the instructions and
enter the required information where needed. This information
should be provided by your Service Provider.
Click
each time to continue.
4. After configuring the AST510 it will restart. In some cases your PC
must be restarted as well for the changes to take effect:
5. After restarting the PC the AST510 Setup wizard will pop up again
to announce the successful configuration.
Click to close the wizard.
6. In case multiple PCs on your local network need to be configured
to enable access to the AST510 you can either:
Rerun the AST510 Setup wizard on every PC
Or, if applicable:
Enable the automatic IP address configuration (DHCP client)
on every PC.