User`s guide

Procedure
BrowsetoDefaults
result
9 Maintenance - Speed Touch ToDefaults
77 / 104
3EC 17058 AAAA TCZZA Ed. 04
9.2.1 BrowsetoDefaults
Proceed as follows:
1. Click
on the STHome pages to pop up the
'System setup' page:
2. Click if you are sure to reset the STHome to its
original defaults.
3. The STHome will ask to confirm the reset:
4. Click if you are sure. Otherwise click .
5. Click
to make the BrowsetoDefaults permanent.
6. Press the reload button of your Web browser.
After reset, all original configurations of the STHome are
restored, except the STHome Ethernet IP address(es).