User`s guide

'DHCP Server Startup
Mode' radiobuttons
Configuring the
STHome for a LAN
without DHCP
Configuring the
STHome as DHCP
server
Configuring the
STHome as DHCP client
6 Networking Services - IP, DHCP and DNS
62 / 104
3EC 17058 AAAA TCZZA Ed. 04
The 'DHCP Server Startup Mode' radiobuttons allow to configure
the STHome DHCP server mode.
To setup the STHome without DHCP, tick .
In this configuration, it is assumed that all members, the STHome
included, have static IP addresses.
See subsection 6.2 for static IP addressing of the STHome.
Note: This configuration might be required in case you use the Transparent
Bridging packet service.
To setup the STHome as DHCP server, tick .
Via the 'DHCP Server Configuration' tables, you can configure the
STHome DHCP server settings.
IP Address
STHome DHCP
Server
Internet
Access Point
ATM
Network
Note: This setting might cause side effects with Bridging. See section 6.1.1 for
more information.
To setup the STHome as DHCP client, tick on the
'DHCP' page.
IP Address
Internet
Access Point
ATM
Network
DHCP Client
IP Address
DHCP Server
STHome