User`s guide

Single PC wiring
MDI vs. MDIX hub
ports and the STHome
1 Speed Touch Installation Guide
19 / 104
3EC 17058 AAAA TCZZA Ed. 04
Using a hub you can connect multiple PCs to your STHome:
10 BaseT
MDIX
Hub
MDI
MDI
MDI
MDIX
In the above figure an MDIX port on the hub connects to the
STHome. Therefore, a crossover LAN cable is used.
Note: In case the hub's uplink" port is used to wire the STHome you can use
the included straightthrough LAN cable.
Cascading Repeating Hubs
You may cascade up to four repeating hubs in your LAN
(limitations of Repeating Ethernet V2.0/IEEE802.3 hubs). In case
more hubs need to be cascaded, you must use switching hubs.
10BaseT Half Duplex Interfacing
Make sure the 10BaseT port(s) of your PC(s) are configured for
either Auto Negotiation or Half Duplex.
Never configure the 10BaseT Ports for FullDuplex !
CAUTION
CAUTION