User`s guide

Wiring procedure
Single PC wiring
1 Speed Touch Installation Guide
18 / 104
3EC 17058 AAAA TCZZA Ed. 04
1.2.2 STHome Wiring
Proceed as follows:
1. Use the included LAN cable to wire your PC's Ethernet port to
STHome's Ethernet interface.
2. If you have a dual port STHome you can use the included
LAN cable to wire your PC's ATMF25.6 port to the STHome's
ATMF25.6 port.
3. Use the included DSL cable to wire the STHome's Line port to
your DSL wall outlet.
4. Plug the adapter's coaxial jack into the STHome's receptacle
marked 'DC'.
Note: Firstly check whether the included mains adapter suits the local
power specifications. If you are not sure of the regional power conditions,
check the adapter's specifications in section B.2 and contact your local
power company.
Once all connections are made the result should look similar as
below: