Operation Manual
DSL and telephone
service
Ethernet networking
VoDSL
Accessing the AST710
1 Speed Touch Quick Guide
15 / 254
3EC 17605 AAAA TCZZA Ed. 02
1.2.1 What you Need
Asymmetric Digital Subscriber Line (ADSL) service must be
enabled on your telephone line.
You need a central splitter, or distributed filters for decoupling
ADSL, and Plain Old Telephone Service (POTS) telephone signals.
Contact your SP for more information.
To use the Ethernet port(s) you need at least:
One PC with an Ethernet 10BaseT PCNetwork Interface
Card (NIC) installed
For local networking, a 10BaseT hub (if needed) and the
necessary connection cables.
For VoDSL service, you need at least:
One POTS device, e.g. a telephone set, fax, or analog
modem. Maximum four(eight) POTS devices can be
connected.
For local configuration via HTTP/HTML, you need:
The TCP/IP protocol suite installed
A Web browser.
For native Command Line Interface (CLI) you need:
A serial cable
An ASCII terminal (VT100), or a PC with ASCII terminal
emulation.