Troubleshooting guide

3 — NE user and device security
Alcatel-Lucent 5620 Service Aware Manager 3-29
5620 SAM
System Administrator Guide
c Service Group
d Host Group
10 Click OK to close the Firewall Site (Edit) form.
11 The Firewall - Default (Edit) form opens.
12 The Network Interfaces, SAPs and SDPs tabs display the firewall instances
associated with the zone.
13 To add a firewall entry for the network interfaces, SAPs or SDPs:
i Choose a Site Id from the list.
ii Click on Add Firewall Entry.
iii The Firewall Interface Entry, Firewall SAP Entry, or the Firewall SDP Entry
(Create) form opens.
iv Configure the required parameters.
v Click Select, the Select Zone form opens.
vi Choose a zone from the list and click OK.
vii Click OK in the Firewall Interface Entry, Firewall SAP Entry, or the Firewall
SDP Entry (Create) form.
viii The Firewall - Default (Edit) form opens.
14 To view the Firewall Properties from the Network Interfaces, SAPs and SDPs tabs,
choose a Site Id and click Properties.
15 Click OK to close the Firewall - Default (Edit) form.
Note 1 — Policies can be deleted in the following order:
• Zone
• Rule Set
• Host Group or Service Group
Note 2 — Host Group or Service Group policies cannot be deleted if rule
sets are associated with them.
Note 3 — Rule set policies cannot be deleted if they are associated
with zones.
Note 4 — Zone policies cannot be deleted if they are associated with
SAP, SDP, MGMT, or CPM interfaces.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01