Troubleshooting guide

3 — NE user and device security
3-26 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
7 Distribute the policy to NEs, as required.
8 Close the open forms.
Procedure 3-15 To perform CMPv2 actions
1 Choose Administration→Security→NE PKI Authentication→Site Public Key
Infrastructure from the 5620 SAM main menu. The Select Site form opens.
2 Choose an NE in the list and click OK. The Site Security Public Key Infrastructure
(Edit) form opens.
3 Click Admin Certificate and choose Perform CMPv2 Actions. The Admin Certificate
form opens.
4 Perform one of the following to configure the CA Profile Name parameter.
a Select a CA profile.
b Enter the profile name.
CMPv2 actions
5 Select a CMPv2 action from the drop-down menu beside the Type parameter in the
Action panel. Table 3-1 lists the available CMPv2 actions. You can view the status
of the last CMPv2 action performed on this site in the Last Action Status panel.
Table 3-1 CMPv2 actions
Initial Registration
6 Configure the required parameters in the Action panel.
7 Perform one of the following:
a To perform an initial registration using a password, configure the required
parameters in the Protection Algorithm - using Password panel.
b To perform an initial registration using a certificate, configure the required
parameters in the Protection Algorithm - using Certificate panel.
8 Click Apply to perform the action.
Action See step
Initial Registration 6
Certificate Request 10
Key Update 14
Poll 18
Clear Request 20
Abort Request 22
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01