Troubleshooting guide

3 — NE user and device security
Alcatel-Lucent 5620 Service Aware Manager 3-25
5620 SAM
System Administrator Guide
11 To reload a certificate or keypair file from a local compact flash drive, perform
the following steps.
i Choose Admin Certificate→Reload File from the More Actions button menu.
The Admin Certificate Reload File form opens.
ii Configure the required parameters.
iii Click Execute. The file content is reloaded.
iv Close the form.
12 To clear the OCSP cache, perform the following steps.
i Choose Admin Certificate→Clear OCSP Cache from the More Actions button
menu. The Admin Certificate Clear OCSP Cache form opens.
ii Configure the required parameters.
iii Click Execute. The file content is reloaded.
iv Close the form.
13 To perform CMP2 actions, see Procedure 3-15.
14 Close the Site Security Public Key Infrastructure (Edit) form.
Procedure 3-14 To configure a PKI certificate authority profile
1 Choose Administration→Security→NE PKI Authentication→PKI Certificate
Authority Profiles from the 5620 SAM main menu. The PKI Certificate Authority
Profiles form opens.
2 Click the Create button. The Certificate Authority Profile (Create) form opens.
3 Configure the required parameters.
4 Click on the CMPv2 tab and configure the required parameters.
5 To create a CMP key, perform the following steps.
i Click Create. The CMP Key List (Create) form opens.
ii Configure the parameters.
iii Click OK to save your changes and close the form.
6 Click Apply to save your changes.
Note — A key that is created locally on an NE, for example, using a CLI,
is not sent to the 5620 SAM, and is displayed on the Certificate Authority
Profile form as N/A. Any N/A keys on an NE must be deleted before the
profile can be distributed to the NE.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01