Troubleshooting guide

3 — NE user and device security
Alcatel-Lucent 5620 Service Aware Manager 3-21
5620 SAM
System Administrator Guide
Procedure 3-11 To configure an OmniSwitch RADIUS, TACACS+, or
LDAP security authentication policy
1 Choose Administration→Security→NE AOS Security Authentication from the
5620 SAM main menu. The NE AOS Security Authentication form opens.
2 Click Create or choose an entry and click Properties. The Site AOS Security Policy
(Create|Edit) form opens.
3 Configure the required parameters.
4 Click Apply to save the changes.
5 Distribute the policy to NEs, as required.
6 Close the open forms.
Procedure 3-12 To configure device system security settings
Perform this procedure to view or configure the global system security settings of a
managed device.
1 Choose Administration→Security→NE System Security from the 5620 SAM main
menu. The Select Site form opens.
2 Select a managed device and click OK. The NE System Security (Edit) form opens.
3 To configure the FTP, Telnet, or SSH server parameters, click on the Servers
Configuration tab.
4 To configure allowed SSH ciphers, perform the following.
i Click on the Servers Configuration tab, then on the SSH Cipher List tab.
ii Click Create in the Client tab. The SSH Client Cipher List (Create) form
opens.
iii Configure the required parameters.
iv Save and close the form.
v Click on the Server tab and click Create. The SSH Server Cipher List (Create)
form opens.
Note — Items that appear on the NE System Security (Edit) form are
device-dependent. Not all configuration form tabs and parameters in
this procedure apply to all devices.
Note — The 7705 SAR may become temporarily unreachable when
enabling SSH and starting the SSH server on the device.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01