Troubleshooting guide

3 — NE user and device security
3-20 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Procedure 3-10 To configure an NE TACACS+ authentication policy
See the appropriate TACACS+ documentation for more information about configuring
TACACS+ servers.
1 Choose Administration→Security→NE TACACS+ Authentication from the 5620 SAM
main menu. The NE TACACS+ Authentication form opens.
2 Click Create or choose an entry and click Properties. The Site TACACS+ Policy
(Create|Edit) form opens.
3 Configure the required parameters.
The Use Privilege Map parameter is configurable when the Enable Authorization
parameter is set to true.
4 Click on the Privilege Level Map tab.
5 Click Create. The Privilege Level Map (Create) form opens.
6 Configure the Privilege Level parameter.
7 Choose a user profile.
8 Click on the Servers tab.
9 Perform the following steps to specify a TACACS+ server.
i Click Create or choose an entry and click Properties. The Site TACACS+ Server
(Create | Edit) form opens.
ii Configure the required parameters.
iii Save your changes and close the form.
10 Repeat step 9 to specify an additional TACACS+ server, if required.
11 Click Apply to save the changes.
12 Distribute the policy to NEs, as required.
13 Close the open forms.
Note — You can specify up to five TACACS+ servers.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01