Troubleshooting guide

3 — NE user and device security
Alcatel-Lucent 5620 Service Aware Manager 3-19
5620 SAM
System Administrator Guide
4 Specify the types and order of password authentication to be used to verify the
user account password using the Authentication Order 1 through 3 parameters. Set
the order from the most preferred authentication method to the least preferred.
5 Configure the password complexity rules using the parameters in the Complexity
Rules panel.
6 Click Apply to save the changes.
7 Distribute the policy to NEs, as required.
8 Close the open forms.
Procedure 3-9 To configure an NE RADIUS authentication policy
Perform this procedure to create or modify a RADIUS authentication policy for an NE
that specifies one or more RADIUS servers. See the appropriate RADIUS documentation
for information about configuring a RADIUS server.
1 Choose Administration→Security→NE RADIUS Authentication from the 5620 SAM
main menu. The NE RADIUS Authentication form opens.
2 Click Create or choose an entry and click Properties. The Site RADIUS Policy
(Create|Edit) form opens.
3 Configure the required parameters.
4 Click on the Servers tab.
5 Perform the following steps to specify a RADIUS server.
i Click Create or choose an entry and click Properties. The Site RADIUS Server
(Create | Edit) form opens.
ii Configure the required parameters.
iii Save your changes and close the form.
6 Repeat step 5 to specify an additional RADIUS server, if required.
7 Click Apply to save the changes.
8 Distribute the policy to NEs, as required.
9 Close the open forms.
Note — You can specify up to five RADIUS servers.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01