Troubleshooting guide

3 — NE user and device security
3-16 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
iv Use the Select button in the Enforcement panel to choose a policer.
v If the Rate Type parameter is set to Kbps, configure the Rate Limit (Kb/s)
and Buffer Space (Bytes) parameters in the Kbps panel. You can specify a
default value for these parameters by selecting the Default check box.
vi If the Rate Type parameter is set to Packets, configure the Rate Limit
(packets), Interval (seconds), and Initial Delay (packets) parameters in the
Packets panel. You can specify a default value for the Rate Limit (packets)
parameter by selecting the Default check box.
vii Configure the Exceed Action parameter. If you set this parameter to Discard
or Low Priority, configure the Hold Down Duration (seconds) parameter.
viii Save your changes and close the form.
9 Repeat step 8 to configure an additional protocol, if required.
10 Click Apply to save the changes.
11 Distribute the policy to NEs, as required.
12 Close the open forms.
Procedure 3-6 To configure a site user profile
1 Choose Administration→Security→NE User Profiles from the 5620 SAM main
menu. The NE User Profiles form opens.
2 Click Create or choose a profile and click Properties. The Site User Profile
(Create|Edit) form opens.
3 Configure the required parameters.
Note — If the Type parameter is set to Static, you must choose a static
policer. If the Type parameter is set to Dynamic, you must choose a
local monitoring policer. However, if the Type parameter is set to
Dynamic and the Local Monitoring Bypass parameter is enabled, you
cannot specify a local monitoring policer.
Note — To perform this procedure, you require an account with an
assigned administrator scope of command role to the sitesec package,
or a scope of command role with write access permission to the sitesec
package.
Note — You require LI user privileges to configure the LI Profile
parameter. See “Lawful Intercept overview” in the 5620 SAM User
Guide ror information about LI.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01