Troubleshooting guide

2 — 5620 SAM user security tasks
2-42 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Procedure 2-35 To change the 5620 SAM Task Manager default
settings
The Task Manager lets 5620 SAM operators monitor the progress of operational tasks.
Only 5620 SAM administrators can change task monitoring parameters.
1 Log in to the 5620 SAM main server station as the samadmin user.
2 Navigate to the server configuration directory, typically
/opt/5620sam/server/nms/config.
3 Open the nms-server.xml file using a text editor.
4 Find and configure the required parameters:
• maxNumRetainedTasks
• numTasksToPurgeWhenFull
• successfulTasksPurgeInterval
• failedTasksPurgeInterval
5 Save and close the nms-server.xml file.
6 Open a console window and navigate to the server binary directory, typically
/opt/5620sam/server/nms/bin.
7 Enter the following to restart the main server:
bash$ ./nmsserver.bash force_restart ↵
The main server restarts, and the configuration change takes effect.
8 To modify the nms-client.xml file on the 5620 SAM standby server station:
i Navigate to the client configuration directory, typically
/opt/5620sam/client/nms/config.
ii Open the nms-client.xml file using a text editor.
iii Configure the autoRefreshInterval parameter.
Note — The Task Manager is operational with the default values.
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Note — If one or more of the parameters are changed from their
default values, you must restart the 5620 SAM server for the changes to
take effect.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01