Troubleshooting guide

14 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 14-49
5620 SAM
System Administrator Guide
Procedure 14-23 To change the OLC state of equipment or services
1 Choose Administration→OLC from the 5620 SAM main menu. The OLC form opens.
2 Choose a service or network object from the drop-down menu and click Search.
3 Select an entry from the list and click OLC State→Maintenance or OLC State→In
Service. You can select multiple objects at once.
The OLC state of the selected object changes in the filtered list panel.
4 Close the form.
Procedure 14-24 To view or change the OLC state from the alarm
window
If required, create a filter
1 Click on the filter icon in the alarm window. A filter form opens.
2 Choose Assigned OLC State from the Attribute drop-down menu.
3 Configure the filter form to search for alarms. See the 5620 SAM User Guide for
more information about creating search filters.
Change the OLC state of an alarm
4 Select an alarm from the list. You can select multiple alarms at once.
5 Right-click on the alarm and choose Assign OLC State. The OLC State Assignment
form opens.
6 Choose Maintenance or In service from the Assigned OLC State drop-down menu.
7 Save your changes and close the form.
Caution 1 — Changing the OLC state can affect 5620 SAM performance
and can take several minutes to complete.
Caution 2 — Changing the OLC state of a parent object changes the
OLC state of the child objects.
Note — You can configure the Revert OLC State parameter on the
properties form for the object. The Revert OLC State parameter allows
you to specify that the object automatically reverts to either the In
Service mode or the Maintenance mode after a selected time,
depending on the current OLC state of the object.
You can also configure the OLC state of a service or network object by
configuring the OLC State parameter on the General tab of the object
properties form.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01