Troubleshooting guide

14 — As required maintenance tasks
14-24 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
ii Enter the following:
# cd /etc/init.d ↵
iii Enter the following:
# mv 5620SAMServerWrapper inactive.5620SAMServerWrapper ↵
4 Perform the following steps to uncompress the appropriate NE configuration
backup archive file to the /opt/5620sam/nebackup directory on the main server:
i Log in to the main server station as the root user.
ii Open a console window and copy the NE configuration backup archive file to
the current directory.
iii Perform one of the following:
• On a Solaris station, enter the following:
# tar xvfp archive_file
• On a RHEL station, enter the following:
# tar xvfp archive_file -C /
where archive_file is the name of the archive file created at the time of the database
backup
The file is uncompressed in the /opt/5620sam/nebackup directory.
5 Perform the following steps to stop the 5620 SAM database:
i Log in to the database station as the root user.
ii Enter the following:
# cd /etc/rc3.d ↵
iii Enter the following to stop the Oracle proxy daemon:
# ./S965620SAMOracleProxyWrapper stop ↵
iv Enter the following to stop the 5620 SAM database daemon:
# ./S95db5620sam stop ↵
Do not proceed until the command displays the following text string:
Done
Note — You must use the archive file created at the time of the
database backup.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01