Troubleshooting guide

14 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 14-21
5620 SAM
System Administrator Guide
3 Copy the appropriate NE configuration archive file to the path/nebackup/backup
directory.
where
path is the 5620 SAM installation location, typically /opt/5620sam
4 Enter one of the following:
• on a RHEL station:
bash$ gzip -cd /opt/5620sam/nebackup/backup/nebackup_YYYY-MM-
DD-hh-mm.tgz | tar xf - -C /
where YYYY-MM-DD-hh-mm.tgz is the name of the backup file
The NE configuration files are extracted to the /opt/5620sam/nebackup
directory.
• on a Solaris station:
bash$ gzip -cd path/nebackup/backup/nebackup_YYYY-MM-DD-hh-mm
.tgz | tar xf -
where
path is the 5620 SAM installation location, typically /opt/5620sam
YYYY-MM-DD-hh-mm.tgz is the name of the backup file
The NE configuration files are extracted to the path/nebackup directory.
5 When the restore operation is complete, close the console window.
Note — If you are concurrently restoring the 5620 SAM database,
ensure that you use the NE configuration archive file created at the
time of the database backup.
An NE configuration archive file is named using the file creation time,
and has the following format:
YYYY-MM-DD-hh-mm.tgz
Note — If you intend to copy and paste a command from this step into
the console window, ensure that you remove the line break from the
command text before you paste the text.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01