Troubleshooting guide

14 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 14-17
5620 SAM
System Administrator Guide
vi Navigate to the server binary directory, typically
/opt/5620sam/server/nms/bin.
vii Enter the following:
bash$ ./nmsserver.bash read_config ↵
The primary main server puts the configuration change into effect.
16 Close the console window.
17 Log out of the primary main server station.
14.6 Starting and stopping a 5620 SAM auxiliary server
The following procedures describe how to start and stop an auxiliary server, for
example, when the auxiliary server requires maintenance.
Procedure 14-8 To start an auxiliary server
1 Choose Administration→System Information from the 5620 SAM main menu. The
System Information form opens.
2 Click on the Auxiliary Servers tab.
3 Select the auxiliary server and click Properties. The Auxiliary Server (Edit) form
opens.
4 Set the Operation Mode parameter to In Service.
5 Click OK to commit the change and close the form.
6 Close the System Information form.
7 Log on to the auxiliary server station as the samadmin user.
8 Open a console window.
9 Enter the following:
bash$ path/nms/bin/auxnmsserver.bash auxstart ↵
where path is the auxiliary server installation directory, typically /opt/5620sam/auxserver
The auxiliary server starts. The initialization may require twenty minutes or more.
10 Close the console window.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01