Troubleshooting guide

14 — As required maintenance tasks
14-14 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
- sqltxplain
- appqossys
- outln
- dip
- system
- exit
7 Enter a user name. The script prompts you for a password.
8 Enter the new password, which must:
• Be between 4 and 30 characters long
• Contain at least three of the following:
• lower-case alphabetic character
• upper-case alphabetic character
• numeric character
• special character, which is one of the following:
# $ _
• Not contain four or more of the same character type in sequence
• Not be the same as the user name or the reverse user name
• Not contain a space character
• Differ by at least four characters from the current password
If the password is valid, the script prompts you to retype the password.
9 Enter the new password again. The script displays the following message:
WARNING: Changing passwords may cause instability to the 5620 SAM
server as well as the Oracle proxy on the database server.
Do you want to proceed (yes/no)?:
10 Enter yes ↵. The script displays status messages and then exits. If the status
indicates a password change failure, contact Alcatel-Lucent technical support.
11 Record the password in a secure location.
12 If you are changing a password other than the SYS or database user password, go
to step 16.
13 If you are changing the SYS user password, perform the following steps on each
5620 SAM database station.
i Log in to the database station as the root user.
ii Enter the following to stop the database proxy:
# /etc/rc3.d/S965620SAMOracleProxyWrapper stop ↵
Do not proceed until the command returns the following:
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01