Troubleshooting guide

14 — As required maintenance tasks
14-12 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Do not proceed until the command returns the following:
Done
iii Enter the following to start the database proxy:
# /etc/rc3.d/S965620SAMOracleProxyWrapper start ↵
Do not proceed until the command returns the following:
Done
iv Log out of the database station.
b If you are changing the database user password, perform the following steps.
i Navigate to the server binary directory, typically
/opt/5620sam/server/nms/bin.
ii Enter the following to restart the main server:
bash$ ./nmsserver.bash force_restart ↵
iii Enter the following to display the server status:
bash$ ./nmsserver.bash -s nms_status ↵
The command returns server status information.
If the main server is not completely started, the first line of status
information is the following:
Main Server is not ready...
The main server is completely started when the command returns the
following:
-- SAM Server is UP
11 Close the console window.
Procedure 14-7 To change the Oracle SYS or database user password
in a redundant 5620 SAM system
Perform this procedure to change the password of a user associated with the 5620 SAM
database or Oracle functions in a redundant 5620 SAM system.
Caution — The procedure requires a restart of each 5620 SAM main
server, which is service-affecting. Alcatel-Lucent strongly recommends
that you perform this procedure only during a scheduled maintenance
period.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01