Troubleshooting guide

14 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 14-11
5620 SAM
System Administrator Guide
- database_user_name (installation default is samuser)
Other Database Users:
- sqltxplain
- appqossys
- outln
- dip
- system
- exit
5 Enter a user name. The script prompts you for a password.
6 Enter the new password, which must:
• Be between 4 and 30 characters long
• Contain at least three of the following:
• lower-case alphabetic character
• upper-case alphabetic character
• numeric character
• special character, which is one of the following:
# $ _
• Not contain four or more of the same character type in sequence
• Not be the same as the user name or the reverse user name
• Not contain a space character
• Differ by at least four characters from the current password
If the password is valid, the script prompts you to retype the password.
7 Enter the new password again. The script displays the following message:
WARNING: Changing passwords may cause instability to the 5620 SAM
server as well as the Oracle proxy on the database server.
Do you want to proceed (yes/no)?:
8 Enter yes ↵. The script displays status messages and then exits. If the status
indicates a password change failure, contact Alcatel-Lucent technical support.
9 Record the password in a secure location.
10 Perform one of the following.
a If you are changing the SYS user password, perform the following steps.
i Log in to the 5620 SAM database station as the root user.
ii Enter the following to stop the database proxy:
# /etc/rc3.d/S965620SAMOracleProxyWrapper stop ↵
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01