Troubleshooting guide

14 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 14-9
5620 SAM
System Administrator Guide
b Perform the following steps to run the disk performance benchmark utility
on a 5620 SAM auxiliary server station:
bash$ /opt/5620sam/auxserver/nms/bin/unsupported/5620_SAM_IO
Test/5620_SAM_IOTest.pl -d target
c Perform the following steps to run the disk performance benchmark utility
on a 5620 SAM database station:
# /opt/5620sam/samdb/install/tools/unsupported/5620_SAM_IOTe
st/5620_SAM_IOTest.pl -d target
d Perform the following steps to run the disk performance benchmark utility
on an auxiliary database station:
# /opt/5620sam/samauxdbproxy/bin/unsupported/5620_SAM_IOTest
/5620_SAM_IOTest.pl -d target
where target is the disk partition to test
3 Record the utility output.
4 Increase the disk space of the target disk partition.
5 As required, repeat steps 2 and 3.
6 If the utility reports that a Read, Write, or Latency value is not within tolerance,
modify the disk deployment and perform the procedure again.
Contact Alcatel-Lucent technical support for further assistance.
14.4 Relinking the Oracle executable files
You must relink the Oracle executable files on a 5620 SAM database station after
you apply an OS patch, or after an OS upgrade.
Procedure 14-5 To relink the Oracle executable files
1 Log in to the 5620 SAM database station as the Oracle management user.
2 Open a console window and enter the following to run the relinking script:
bash$ /opt/5620sam/database_name/install/config/database_name/re
linkOracle.sh ↵
where database_name is the name of the 5620 SAM database, for example, samdb on a
standalone database station
Note 1 — You require Oracle management user privileges on the
5620 SAM database station to perform this procedure.
Note 2 — This procedure requires a reboot of the 5620 SAM database
station.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01