Troubleshooting guide

14 — As required maintenance tasks
14-2 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
14.1 General 5620 SAM platform changes
After you make a change to the 5620 SAM main server, auxiliary server, or database
platform, such as increasing or decreasing the amount of RAM, adding or removing
a CPU, or installing another NIC type, you must uninstall and reinstall the
5620 SAM software.
14.2 Adding or removing RAM
After you change the amount of RAM on a 5620 SAM station, you must do the
following before you restart the 5620 SAM component on the station:
• 5620 SAM database station—reconfigure the Oracle System Global Area, or
SGA; see Procedure 14-1
• main server station—run the 5620 SAM server installer using the “Main Server
Configuration” option; see Procedure 14-2
• auxiliary server station—run the 5620 SAM server installer using the “Auxiliary
Server Configuration” option; see Procedure 14-3
Procedure 14-1 To reconfigure a 5620 SAM database after a RAM
upgrade
Perform this procedure after a change in the amount of RAM that is available to the
5620 SAM database.
1 Log in as the root user on the database station.
2 Open a console window and enter the following to stop the 5620 SAM database:
# /etc/rc3.d/S95db5620sam stop ↵
Do not proceed until the command returns the following text string:
Done
Caution — To prevent a network management outage,
Alcatel-Lucent recommends that you contact 5620 SAM technical
support before you modify the platform of a 5620 SAM component.
Caution — The procedures in this section are to be performed only
during a scheduled maintenance period, when the 5620 SAM system
is shut down for the RAM upgrade.
Note — You require root user privileges on the database station to
perform this procedure.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01