Troubleshooting guide

8 — NE maintenance
8-48 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Before performing this procedure, you must perform Procedure 8-18 to import the
required device software image.
1 Choose Administration→NE Maintenance→Software Upgrade from the 5620 SAM
main menu. The Software Upgrade form opens.
2 Select the required software upgrade policy.
3 Click on the Software Images tab.
4 Select a software image in the list and click Schedule Upgrades. The Select Sites
form opens.
5 Choose an NE in the list and click OK. You can choose multiple NEs. The Select
Schedule form opens.
You cannot use a schedule in which the Ongoing parameter is enabled.
6 Select a schedule in the list and click OK.
See Procedure 8-28 and the 5620 SAM User Guide for more information on how to
create a schedule.
7 Click Yes to confirm the scheduled upgrade. The 5620 SAM schedules the upgrade.
8 Close the form.
Procedure 8-28 To manage scheduled software upgrades
1 Choose Administration→NE Maintenance→Software Upgrade from the 5620 SAM
main menu. The Software Upgrade form opens.
2 Click on the Software Upgrade Status tab.
3 Click Scheduled Task. The Scheduled Task form opens.
4 Select a scheduled software upgrade entry and click Properties. The Software
Upgrade Scheduled Task form opens.
i Administratively enable or disable the scheduled software upgrade, if
required, by configuring the Administrative State parameter.
ii Click Properties in the Schedule panel to view the schedule information, if
required.
Note — The 5620 SAM performs the upgrade according to the
configuration in the software upgrade policy that is assigned to the NE.
Note — If no schedules are listed, you can create one for the upgrade.
You cannot proceed unless a schedule is available. See the 5620 SAM
User Guide for information about creating 5620 SAM schedules.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01