Troubleshooting guide

ManualsBrandsAlcatel ManualsComputer equipmentSecurity Management Server (SMS) Release 9.4

221

222

223

224

225

226

227

228

229

230

8 — NE maintenance

8-34 Alcatel-Lucent 5620 Service Aware Manager

5620 SAM

System Administrator Guide

i Select the NEs that are to be upgraded.

ii Click on the Software Images tab. A list of software images on the selected

NEs is displayed.

iii Select the required software image in the list and click Activate Image. A

dialog box appears.

iv Click Yes. The software image is activated on each NEs.

v Click on the Software Images tab to monitor the activation progress.

vi Wait until the image activation completes.

vii Choose Equipment from the navigation tree view selector. The navigation

tree displays the Equipment view.

viii Navigate to the shelf object. The path is Network→NE→Shelf.

ix Right-click the shelf icon and choose Reboot or Reboot Upgrade. A dialog box

appears.

x Click Yes. The NE reboots.

13 Verify the upgrade success, as described in Procedure 8-32.

14 Use the 5620 SAM FTP or SSH file browser to verify that the transferred files and

configuration are on each upgraded NE. See Procedure 8-35 for information about

using the FTP file browser. See Procedure 8-36 for information about using the SSH

file browser.

15 Resynchronize each upgraded NE.

Note 1 — Some device software upgrades, for example, ISSUs, do not

require a reboot. See the device documentation for more information.

Note 2 — When you perform an ISSU, you can manually soft reset or

hard reboot the IOMs or IMMs after the upgrade. A soft reset results in

minimal downtime, but has restricted support. See Procedure 8-19 to

perform a manual soft reset, or Procedure 8-20 to perform a manual

hard reboot.

Note 3 — For 7710 SR MDAs, CMAs, and MCMs, the device performs the

required resets automatically after an ISSU.

Note 4 — When the IOMs are not manually soft reset or hard rebooted,

the device performs a soft reset, if supported, after two hours;

otherwise, the device performs a hard reboot after two hours.

Note — Only the 7210 SAS and 7705 SAR support the Reboot Upgrade

option.

Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01