Troubleshooting guide

8 — NE maintenance
Alcatel-Lucent 5620 Service Aware Manager 8-15
5620 SAM
System Administrator Guide
8 Depending on the Transfer Protocol parameter value you specified, configure the
FTP or SFTP parameters.
9 Configure the remaining parameters.
10 Click Apply. The Software Upgrade Policy (Create) form name changes to Software
Upgrade Policy (Edit).
11 Click on the Software Upgrade Policy Assignment tab and distribute the policy to
one or more NEs, as required.
Procedure 8-2 To configure the 5620 SAM deployment policy
1 Choose Administration→NE Maintenance→Deployment from the 5620 SAM main
menu. The Deployment form opens.
2 Click on the Deployment Policy tab.
3 Configure the required parameters.
4 Save your changes and close the form.
Procedure 8-3 To create a device backup policy
The default backup policy is assigned automatically to all 5620 SAM-managed NEs that
do not currently have an assigned backup policy.
1 Choose Administration→NE Maintenance→Backup/Restore from the 5620 SAM
main menu. The Backup/Restore form opens.
2 Click on the Backup/Restore Policy tab and click Create. The Backup Policy
(Create) form opens.
3 Configure the Enable Backup parameter.
If you disable the Enable Backup parameter, the remaining parameters on the
form cannot be configured. Go to step 7.
Note 1 — See the 5620 SAM LTE RAN User Guide for information about
creating an eNodeB backup policy.
Note 2 — See the 5620 SAM Optical User Guide for information about
creating an 1830 PSS or 1830 PSS OCS backup policy.
Note 3 — See the 5620 SAM LTE ePC User Guide for information about
creating a 7750 MG backup policy.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01