Troubleshooting guide

6 — 5620 SAM database management
Alcatel-Lucent 5620 Service Aware Manager 6-5
5620 SAM
System Administrator Guide
2 View the information.
3 Close the Database Manager (Edit) form.
Procedure 6-2 To display the auxiliary database status in the GUI
Perform this procedure to display information about an auxiliary database in the
5620 SAM client GUI.
1 Choose Administration–>Database from the 5620 SAM main menu. The Database
Manager form opens.
2 Click on the Auxiliary Databases tab. The auxiliary databases are listed.
3 Select an auxiliary database and click Properties. The Auxiliary Database (View)
form opens.
4 View the Database Status and Database Proxy Status. If each is not Up, contact
Alcatel-Lucent technical support for assistance.
Procedure 6-3 To display the auxiliary database status using a CLI
Perform this procedure to display information about an auxiliary database in a CLI
window.
1 To display the status of all auxiliary databases in the cluster, perform the
following steps.
i Log on to a main server station as the samadmin user.
ii Open a console window.
iii Enter the following:
# /opt/5620sam/server/nms/bin/nmsserver.bash -s nms_status
iv View the database and database proxy status. If each is not Up, contact
Alcatel-Lucent technical support for assistance.
2 To display the database proxy status of one auxiliary database, perform the
following steps.
i Log on to the auxiliary database station as the root user.
ii Open a console window.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01