Troubleshooting guide

5 — 5620 SAM component configuration
Alcatel-Lucent 5620 Service Aware Manager 5-29
5620 SAM
System Administrator Guide
The main server reads the nms-server.xml file and LSP on-demand
resynchronization is enabled.
Procedure 5-21 To enable debug configuration file reloading on an
NE for mirror services
Ensure that managed NEs reload the debug configuration file after an NE restarts. This
ensures that the mirror services in the managed network resume operation after a
reboot or a CPM activity switch on the NE that hosts the mirror service. By default,
debug configuration file reloading is disabled.
1 Log in to the main server station as the samadmin user.
2 Open a console window.
3 Navigate to the server configuration directory, typically
/opt/5620sam/server/nms/config.
4 Open the nms-server.xml file using a plain-text editor.
5 Locate the following XML tag:
<serviceMirror
6 Specify the NE location of the debug configuration file. For example:
<serviceMirror
debugFilename=""
reloadDelay="10"
/>
where
reloadDelay specifies the time, in seconds, to wait before a reload request is sent
debugFilename specifies the location of the file on an NE, for example, cf3:/ServiceMirror.dbg
Caution — This procedure requires a 5620 SAM main server restart,
which is service-affecting.
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Note — The debugFilename value must be the debug configuration
filename that is configured on the NEs that host mirror services.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01