Troubleshooting guide

5 — 5620 SAM component configuration
5-28 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
6 Add the following before the end of the SNMP section, ensuring that there is a
space between the last character and the section end, which is marked by a />
tag:
verifyNodeIdentity=”1"
7 Save and close the nms-server.xml file.
8 Navigate to the server binary directory, typically /opt/5620sam/server/nms/bin.
9 Enter the following:
bash$ ./nmsserver.bash read_config ↵
The main server reads the nms-server.xml file and alarm reporting for duplicate
NE system IP addresses is enabled.
Procedure 5-20 To enable LSP on-demand resynchronization
By default, the LSP on-demand resynchronization functionality is disabled. When you
enable LSP on-demand resynchronization, the 5620 SAM scheduled resynchronization is
then disabled for some LSP objects. See “LSP on-demand resynchronization” in the
5620 SAM User Guide for information about which LSP objects do not support
on-demand resynchronization.
1 Log in to the main server station as the samadmin user.
2 Navigate to the server configuration directory, typically
/opt/5620sam/server/nms/config.
3 Create a backup copy of the nms-server.xml file.
4 Open the nms-server.xml file using a plain-text editor.
5 Locate the following line:
<lspOnDemand overrideEnabled="false" />
6 Change "false" to "true".
7 Save and close the nms-server.xml file.
8 Navigate to the server binary directory, typically /opt/5620sam/server/nms/bin.
9 Enter the following:
bash$ ./nmsserver.bash read_config ↵
Caution — Modify only the parameters specified in this procedure.
Unauthorized modification of the nms-server.xml file can seriously
affect network management and 5620 SAM performance.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01