Troubleshooting guide

5 — 5620 SAM component configuration
Alcatel-Lucent 5620 Service Aware Manager 5-27
5620 SAM
System Administrator Guide
enabled="false"
defaultBWThreshold="90"
linkTunnelCacheMaxSize="1000"
tunnelServiceCacheMaxSize="10000"
serviceBWCacheMaxSize="50000"
/>
8 Change enabled="false” to enabled="true".
9 Save and close the nms-server.xml file.
10 Navigate to the server binary directory, typically /opt/5620sam/server/nms/bin.
11 Enter the following:
bash$ ./nmsserver.bash read_config ↵
The main server reads the nms-server.xml file and enables the server CAC features
on the client delegate server.
Procedure 5-19 To enable alarm reporting to identify duplicate NE
system IP addresses
Enable the 5620 SAM to verify the uniqueness of NE system IP addresses. When
verification is enabled, the 5620 SAM generates an alarm when an NE reports a system
IP address that is in use by another NE.
1 Log in to the main server station as the samadmin user.
2 Open a console window.
3 Navigate to the server configuration directory, typically
/opt/5620sam/server/nms/config.
4 Open the nms-server.xml file using a plain-text editor.
5 Locate the following tag that marks the beginning of the SNMP section:
<snmp
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01