Troubleshooting guide

5 — 5620 SAM component configuration
5-26 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
9 Enter the following at the console prompt to restart the 5620 SAM server:
bash$ ./nmsserver.bash force_restart ↵
10 The 5620 SAM main server restarts. The 5620 SAM deletes the configuration
backup files of NEs that are subsequently unmanaged.
Procedure 5-18 To configure service CAC to automatically bind PBB
tunnels
Configure the service CAC functionality to enable the 5620 SAM to automatically bind
PBB tunnels to services based on the available bandwidth.
1 Close each 5620 SAM client that connects to the main server through the client
delegate server, by choosing Application→Exit from the 5620 SAM main menu.
2 Use an OS utility to change the IP address of the client delegate server station to
the new value.
3 Log in to the main server station as the samadmin user.
4 Open a console window.
5 Navigate to the server configuration directory, typically
/opt/5620sam/server/nms/config.
6 Open the nms-server.xml file using a plain-text editor.
7 Locate the following XML tag:
<require-CAC
The service CAC section should read as follows:
<require-CAC
Caution — Restarting a 5620 SAM server is service-affecting. Ensure
that you perform this step only during a scheduled maintenance
window.
Note 1 — This feature has limited availability. Contact your
Alcatel-Lucent technical support representative for information about
the availability of this feature.
Note 2 — You must perform this procedure on each main server in a
5620 SAM system.
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01