Troubleshooting guide

5 — 5620 SAM component configuration
5-16 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Procedure 5-9 To configure the display of multiple 5620 SAM
systems as client GUI login options
Perform this procedure to configure a client GUI login form to list multiple 5620 SAM
systems as options in a drop-down menu. By default, one 5620 SAM system is listed.
1 Click on Application→Exit to close the 5620 SAM client GUI, if it is open. The client
GUI closes.
2 Navigate to the client configuration directory, typically
/opt/5620sam/client/nms/config on Solaris and RHEL, and
C:\5620sam\client\nms\config on Windows.
3 Open the nms-client.xml file using a text editor.
4 Find the lines starting with <j2ee> and <systemMode>. By default, the IP address
and port information of the standalone or redundant servers, as configured during
installation, are displayed.
5 For each standalone main server or redundant main server pair you need displayed
on the client GUI login form, perform the following:
i Copy the entire <j2ee> and <systemMode> sections of the file.
ii Paste the <j2ee> and <systemMode> sections after the previous section.
iii Modify the ejbServer IP address to the IP address or hostname of the server
you need displayed during client GUI login.
Note 1 — You cannot configure a client delegate server to display
multiple server options on the client login form. If you need client
connections to multiple 5620 SAM servers through a client delegate
server, you must install one 5620 SAM client delegate software instance
for each 5620 SAM server.
Note 2 — The 5620 SAM auto-client update function overrides the
nms-client.xml configuration changes that are specified in this
procedure. If the nms-client.xml file on a main server changes, it
overwrites the local client copy the next time the client connects to the
server, unless a client startup option is used to prevent it. For
information about using client startup options, see “5620 SAM GUI
opening and closing procedures” in the 5620 SAM User Guide.
Alcatel-Lucent recommends that you use the 5620 SAM auto-client
update function described in chapter 5 to modify the 5620 SAM client
configuration.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01