Troubleshooting guide

5 — 5620 SAM component configuration
5-14 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
4 Enter the license key to be distributed.
5 Click OK to distribute the license key to all nodes.
6 The Firewall - Default (Edit) form opens.
7 Click OK to close the form.
5.5 System components configuration procedures
The following procedures describe how to configure 5620 SAM system components.
Procedure 5-8 To modify the base configuration of all 5620 SAM
clients
Perform this procedure to modify the base configuration of each 5620 SAM GUI client
that connects to a specific 5620 SAM main server using the auto-client update utility.
1 Log in to the 5620 SAM main server station as the samadmin user.
2 Modify the appropriate client configuration file in the
install_dir/nms/config/clientDeploy directory with the configuration change. For
example, update the nms-client.xml file with a new client log location.
where install_dir is the server installation location, typically /opt/5620sam/server
3 Open a console window.
Warning — Change is applied immediately when the OK button is
clicked.
Note 1 — You can exclude a specific 5620 SAM client from a global
configuration change by using a command line option when you open
the client GUI.
Note 2 — Do not use this procedure to configure SSL for 5620 SAM
clients. Use the appropriate SSL configuration procedures in the
5620 SAM | 5650 CPAM Installation and Upgrade Guide to configure
SSL.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01